PremiumCord HDMI extender 120m , over LAN, over IP, 1 TX to many RX. HDMI Over Ethernet is based on TCP/IP standard. It transmits your HD display with the high resolutions up to 120 meters away from your HDMI or DVI-D source by using one CAT5e/6 cable. With the advantage of TCP/IP standard,you can extend your HD video to multiple displays by using an Ethernet Switch. - Support FULL HD 1080p 120m - DTV resolution:480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz - The video color format supported:24bit/Deep color 30bit/ deep color 36bit - Following TCP/IP standard. - Support HDMI1.3 protocol. - HDCP1.1 & 1.2 protocol compliant - Support point-to-point mode, one point-to-many mode and cascade connection mode. - Support IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices. - Audio format supported: PCM - Support audio:DTS-HD/Dolby-true HD/LPCM7.1/DTS/Dolby-AC3/DSD - Transmission rate supported:10.2Gbps - HDCP 1.2 compatible - The first HDMI extender + splitter function, you can connect 1pcs transmitter + N pcs Receivers as in attached sample - LAN cable TIA/EIA568 B - Repeater use LAN cables Cat5e,Cat6,Cat7 ( the best AWG23 UTP/STP Cu cable, best code:sutpd6c3 ) - Input and output HDMI cables shorter than 5m - Two power adapters 5V 1A included Set consists: 1x Transmitter 1x Receiver 2x IR cables 1x manual 2x